I am providing free 3D print files for the R/C and dollhouse communities. The links are to my account on Thingverse.com and you can download them from there. Please check on my 3D print file group on www.MyRcCenter.com for more up to date files being loaded for the R/C Community by the members.
MK44 Anti-Submarine Torpedo
Decided to do a quick design of a Mk 44 Anti Submarine Torpedo. It’s not completely to scale since I did it from photos. I plan on working on the surface launch tubes in the near future as a different project. I did print it on my Elegoo resin printer and my Creality Ender 3 pro. Feel free to modify it for your own purpose only. I created 2 different types of models. The first is a complete model and the second is a model in four parts, Forward body, Aft Body Fins, and props. I included a base if you just want to display it or you can scale it any way you need for your projects.
https://www.thingiverse.com/thing:4625934
20mm guns and ammo boxes
This model was printed in PLA and Water-Soluble resin. It is a work in progress so you can make changes for yourself. not for commercial use Please. If you use Chitubox for your resin printer make sure you use heavy support at the end of the barrel.
https://www.thingiverse.com/thing:4561750
Wood Pallet
I decided to add some cargo to my LTC-6 project so I created a pallet with Fusion 360. I needed to add cargo for this project
https://www.thingiverse.com/thing:4576268
LTC-6 Anchor Winch
This is a work in progress so feel free to download it and modify it for your own personal use. I Created it using Fusion 360 for my LTC-6 tank landing craft project.
https://www.thingiverse.com/thing:4589304
Balsa Wing Jig
I have wing spare alignment jig that I purchased 25 years ago that cannot be found anywhere, I keep getting viewers on YouTube asking me where to get one. This is for your personal use only. This is especially useful with Guillows kits. and up to .40 size models airplanes.
https://www.thingiverse.com/thing:4577193
Neptune oil Cooker
Here is Satilite40s Neptune oil Cooker. the white cooker was printed on the Ender 3 Pro and the grey cooker was printed on my Elegoo Mars resin printer using water-soluble resin. I had to guess the scale from pictures but you can always scale it down or up. I will tell you it was easy to print in PLA on my Ender 3 Printer. It was rather difficult on my Elegoo Mars resin printer because of the size of the model and I had a learning curve to overcome with the slicer software setting up the supports. It was a fun project so please enjoy the model. Print time will be about 12 hours and there are a lot of supports that you will have to remove so be patient.
http:// https://www.thingiverse.com/thing:4558304
